Digital communications
Digital communications

This free course is available to start right now. Review the full course description and key learning outcomes and create an account and enrol if you want a free statement of participation.

Free course

Digital communications

3.5 Wavelength multiplexing and demultiplexing

Wavelength multiplexers and demultiplexers are needed in order to be able to use wavelength division multiplexing. With just two wavelengths, the multiplexers and demultiplexers can be based on directional couplers because, as mentioned earlier in Section 3.2, couplers are naturally wavelength-dependent and with appropriate design can be arranged to split and combine two chosen wavelengths. As shown in Figure 26, and using the language of a 2 × 2 switch (Figure 24), the coupler is in the ‘cross’ (over) state for λ2 and the ‘bar’ (non cross-over) state for λ1.

Figure 26
Figure 26 Wavelength multiplexing and demultiplexing with a directional coupler

With dense wavelength division multiplexing (DWDM) forty or more wavelengths can share a single fibre.

A number of different technologies have been developed for multiplexing and demultiplexing multiple wavelengths, but the principle is illustrated by a prism, as shown in Figure 27. You are probably familiar with the way in which a prism splits white light into its constituent colours (the rainbow effect), so the principle can be used to separate the different wavelengths in the beam emerging from a fibre carrying a DWDM signal.

Figure 27
Figure 27 Using prisms for wavelength multiplexing and demultiplexing

Used in reverse, a prism can combine the different wavelengths into a single DWDM beam. Wavelength division multiplexers and demultiplexers based upon prisms can be used in practice for DWDM, but not quite as drawn in Figure 27 because lenses are required to couple the light into and out of the fibres.

SAQ 11

Identify three uses of devices based upon directional couplers.

Answer

Three uses of devices based upon directional couplers:

  1. Power splitting, such as for a tree topology

  2. Constructed with electro-optical material, they can be used for switching

  3. They can also be designed so that the splitting is wavelength-dependent so that they can be used as wavelength division multiplexers or demultiplexers.

T305_1

Take your learning further

Making the decision to study can be a big step, which is why you'll want a trusted University. The Open University has nearly 50 years’ experience delivering flexible learning and 170,000 students are studying with us right now. Take a look at all Open University courses.

If you are new to university level study, find out more about the types of qualifications we offer, including our entry level Access courses and Certificates.

Not ready for University study then browse over 900 free courses on OpenLearn and sign up to our newsletter to hear about new free courses as they are released.

Every year, thousands of students decide to study with The Open University. With over 120 qualifications, we’ve got the right course for you.

Request an Open University prospectus