Manufacturing
Manufacturing

This free course is available to start right now. Review the full course description and key learning outcomes and create an account and enrol if you want a free statement of participation.

Free course

Manufacturing

1.16.2 (3-D) - Shapes

Most artefacts have profiles that vary in all three axes. Many processes are suitable for the production of 3D shapes, so we need some further breakdown of this high-level classification. We will split 3D shapes into sheet and bulk shapes.

Sheet products have an almost constant section thickness, which is small compared with their other dimensions, but without any major cavities. Therefore washing-up bowls and car-body panels (before assembly) are examples of sheet products (Figure 14).

Figure 14(a)
Figure 14(a) Plastic washing up bowl
Figure 14(b)
Figure.14(b) Car body panel

The majority of cast products fall into the category of bulk shapes, and have complex forms, often with little symmetry. If they have no significant cavities in them we will call them solid (Figure 15) but if they do have cavities, they will be classed as hollow. The cavities in hollow objects can be quite simple but they can also be more complex, involving re-entrant angles (re-entrant angle: a shape in the mould which would prevent the product from being removed from the mould after solidification), as is the case with the carburettor body in Figure 1.

Figure 15
Figure 15 Plastic saucepan handle and its mould
Figure 16
Figure 16 Zinc alloy carburettor body showing complex internal cavities

One way to present such a classification is by using a hierarchical tree diagram. Figure 17 shows such a diagram for our shape classification. A similar presentation is often used to show family trees. You can see that as you progress down the tree, the shape definition becomes more and more precise. One problem generated by this classification of shape is what to do about containers and similar objects. Depending on how you view the exercise, they could be either sheet, since they tend to have uniform section thicknesses, or hollow since they often have cavities which are entirely enclosed within the artefact. We have chosen to classify them as hollow shapes.

Figure 17
Figure 17 A hierarchical shape classification tree

SAQ 4

Consider the following list of components and artefacts and classify each according to the shape classification given in Classifying shapes.

  1. A plastic tray used to hold the confectionery within a box of chocolates.

  2. A garden hosepipe.

  3. An open-ended spanner.

  4. A plastic (PET) lemonade bottle.

  5. A rail (from a railway track).

  6. A flower pot.

Answer

  1. 3D sheet.

  2. 2D continuous.

  3. 3D bulk solid.

  4. 3D bulk hollow.

  5. 2D continuous.

  6. 3D bulk hollow.

We'll now start to look at the different classes of manufacturing processes, and their advantages and disadvantages.

T173_2

Take your learning further

Making the decision to study can be a big step, which is why you'll want a trusted University. The Open University has nearly 50 years’ experience delivering flexible learning and 170,000 students are studying with us right now. Take a look at all Open University courses.

If you are new to university level study, find out more about the types of qualifications we offer, including our entry level Access courses and Certificates.

Not ready for University study then browse over 900 free courses on OpenLearn and sign up to our newsletter to hear about new free courses as they are released.

Every year, thousands of students decide to study with The Open University. With over 120 qualifications, we’ve got the right course for you.

Request an Open University prospectus