General
Guide content
The main function of the bending machine is to obtain metal profiles of the desired configuration. However, it can also perform additional cutting and profiling functions. Also, a modern bending machine includes a fairly wide range of additional equipment and tools that facilitate work and increase productivity. How not to get confused and what kind of bending machine you need and this article will help you figure it out.
Bending machine is a press-type equipment that is used in the manufacture of various materials, as well as profiles and roof elements. Modern bending machines are relatively easy to operate. If we talk about manual and mechanical bending machines, then even an inexperienced user will not have problems with their use. In turn, electromechanical bending machines are a more complex version of the technique.
Bending machines have three key characteristics - the thickness of the metal that is being processed, the depth of feeding of the metal workpiece and the length of the bend. Modern listogibs take into account all creation technologies in subtleties, which makes it possible to use this device for a variety of types of bending. With the help of listogibs, modern drains and ventilation systems are created, elements necessary for finishing work, segments of a metal roof, facade cladding, etc.
Classification of bending machines
Different drives can be used to control the bending machines, according to which the bending machines are classified into subgroups. Sheet bending machines are manual, electromechanical and hydraulic. Also, from the point of view of the placement method, bending machines can be mobile and stationary.
As soon as you are going to use a bending machine for solving industrial problems, then in such a situation you should take into account all the parameters of the material that is being processed. The most important in this case are the thickness of the metal sheet, the length of the product and the depth of feeding the workpiece. In this case, sheets can be fed both manually and in automatic mode.
Manual metal bending machine is used in bending metal sheets of small thickness (usually no more than a millimeter). These hand-fed machines guarantee precise manufacturing of any product. In the production of components, this does not have to involve much physical effort. But if the thickness of the metal will be more than one and a half centimeters, or if the production will imply significantly large volumes of metal blanks, then in this case it will not be superfluous to use an electromechanical bending machine.
The hydraulic listogib has more advanced technical characteristics - in particular, it can be used to work with metal workpieces up to 2 centimeters thick. Thanks to the synchronous operation of the cylinders of such equipment, it is possible to achieve high-quality manufacturing of any parts. A hydraulic bending machine, in turn, will be most effective if you need to perform work in which the sheet is bent along its entire length. You can find out more about the work of such machines at https://blog.harsle.com/category/press-brake/
When you are deciding which kind of bending machine to choose, do not forget that the right choice is primarily determined by the volume of the product that needs to be made. Also, do not forget that the low price of a metal bending machine can often indicate non-compliance with the requirements (and this can end up sideways). Therefore, it is better to spend more time and money on choosing the right machine, rather than worrying later that the selected equipment does not correspond to the production volume or the thickness of the metal.