Skip to main content

Building your Course

Site: OpenLearn Create
Course: Create your own RCH Course on OpenLearn Create
Book: Building your Course
Printed by: Guest user
Date: Friday, 20 November 2026, 11:50 AM

1. Adding and Ordering Resources and Activities

This unit of the course is focused on adding different types of OpenLearn Create resources and activities to your RCH course, and how you can (re-)order these, as needed. 

You are likely to only need to consult specific sections of this unit, at different points in your direct authoring journey. This unit covers adding resources (such as books, files, headings and pages) and relevant activities for RCH courses (such as quizzes and glossaries) in addition to the practicalities of moving these, as needed, in your course. Please note that for ease we have removed activities and resources that are not relevant to RCH courses from this course so only applicable options are shown.

As you build your course - and spend more time using OpenLearn Create - you should find it gets easier and quicker to add different types of resources and activities. You can also use your check-in meetings or email to raise any issues with - or receive further support from - your RCH point of contact.  

By the end of this unit, you should be able to: 

  • Develop your course structure through the addition of appropriate resources.
  • Add relevant activities to your RCH course, including quizzes, SCORM packages and glossaries.
  • Restructure your course content, as appropriate and if required. 

Let's begin by looking at different resources you might want to incorporate into your course. You will then take a deeper look at activities for your course.

Estimated study time for this unit: 2.75 hours.

2. Adding Resources: Book

The various resources available mean that almost any kind of web content can be added to the course. Let’s start by looking at what you need to do to add a ‘book’ to the unit structure that you set-up in Unit 2. We will then walk through how to add different features (e.g. table and video) to your book. 

A book enables you to create a multi-page resource for learners in a book-like format, with chapters and subchapters. Books can contain media files as well as text and are useful for displaying lengthy passages of information that can be broken down into sections – for example, to display reading material for individual units of study, or as a training handbook or course guide. This course uses Moodle Book, for example. 

Adding a Book to OpenLearn Create

To add a book, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Book icon to open the New Book page.

Add the title of your new book in the Name field. Adding a summary of the book in the Description field is optional.

If you click on the Appearance arrow, there are further options in the Chapter formatting drop-down for you to choose how the link is displayed. We recommend that you use Open as the preferred display option. 

  • None: Chapter and subchapter titles have no formatting.
  • Numbers: The default option, where chapters and subchapter titles are numbered 1, 1.1, 1.2, 2, etc.
  • Bullets: Subchapters are indented and displayed with bullets in the table of contents.
  • Indented: Subchapters are indented in the table of contents. 

Usually the chapter title is displayed both in the table of contents on the left-hand side of the screen and as a heading above the content in the main area of the screen. You tick the Custom titles tickbox, the chapter title appears in the table of contents but is not displayed as a heading above the content: you can add a different title (perhaps one that is longer than the chapter title) as part of the content.

Click on the Save and display button to open the Add new chapter page.

Add the chapter’s title in the Chapter title field and type the main text of the chapter (or copy and paste it from elsewhere) into the Content field.

Click on the Save changes button.

This generates a Table of contents at the top of the left-hand side of the screen. The title of the first chapter will appear here and the content will appear in the main area of the screen.

To add another chapter, click on the + (add or plus) symbol alongside the chapter you’ve just created in the Table of contents.

This will take you back to the Add a chapter page.

Again, fill in the Chapter title and Content fields, and click on Save changes.

This is a screenshot of this unit's Table of Contents, as seen by the course authors when direct authoring. Under the title "Table of Contents" the image shows part of the name of this unit’s first two sections (shown here as “Adding and or…” and “Adding resou…”). Each section is numbered and on its own row. On each row and to the right of the section name there are five icons: an arrow, a pencil, a dustbin, an eye symbol and plus symbol.

As you add more chapters you can:

  • change the order of the chapters by clicking on the arrow icon
  • edit a chapter by clicking on the cog icon
  • delete a chapter by clicking on the dustbin/trashcan icon
  • hide or reveal a chapter by clicking on the eye icon
  • add a new chapter by clicking on the plus icon.

Formatting a Moodle Book Page 

Formatting text in Moodle books in courses built on OpenLearn Create is done with the TinyMCE editor.

The editor includes icons for various formatting functions. You can click on the Reveal or hide additional toolbar items icon (three dots below the first row) to reveal a third row of functions. 

  • Top row: Source code Pro, Undo, Redo, Align left, Align centre, Align right, Justify. Bold, Italic, Font colour, Background colour, Font size, Ordered list, HTML Transcript.
  • Middle row: Reveal or hide additional toolbar items.
  • Bottom row: Image, Multimedia, Insert H5P content, Image description, Link, Unlink, Embed media, No glossary auto-link, Preview, Import Word file, Left to right, Right to left, Decrease indent, Increase indent, Bulleted list, Numbered list. 

These functions, as well as many others, are also available in the options at the top of the editing window: Edit, View, Insert, Format, Tools, Table and Help.

The size of the editing screen can be lengthened by dragging the Resize function at the bottom right of the editing window. 

You can also expand the editing window to match your screen's dimensions, which you may find useful over the following pages when you are adding images or videos. To do this, go to View and then Fullscreen. Repeat this to return to the default size editing window.  

3. Book: Adding Tables, Images and a Box around Text

In the next three sections, we'll take a closer look at how to add different features to your book. Let's begin by adding a box to highlight text, adding a table and/or adding images. 

Highlighting Text by Adding a Box

You might want to highlight some text by adding a box around it.

To add a box around text, while you are editing your book go to Tools/Source code Pro in the text editor’s menu or click on the Source code Pro icon.

Go to the point on the page where you want to add the box and copy in one of the lines of HTML code below:

<div style="width: 200px; border: 1px solid black; border-radius: 5px; padding: 10px; margin: 10px;"><p> This is a basic box with a black border and some text inside it.</p></div>

<div style="width: 200px; border: 2px solid black; border-style: dotted; padding: 10px; margin: 10px;"><p> This is a basic box with a black dotted border and some text inside it.</p></div>

<div style="width: 200px; border: thick red; border-style: dashed; padding: 10px; margin: 10px;"><p> This is a basic box with a red dashed border and some text inside it.</p></div>

<div style=" width: 200px; border: 5px double black; padding: 10px; margin: background-color: lavender"><p> This is a basic box with a double black border and some text inside it.</p></div>

<p style="border-left: 5px solid blue"> This is a blue left border and some text.</p>

Then click on the Save button.

These are just some examples of the many available style options for boxes. If you are familiar with HTML you can use your own styles, or you can adjust the width, border size, border colour, padding, margin, border corners, background colour and border type in these examples using standard inline CSS.

(If you’re new to the subject, W3CSchools CSS tutorial is a good starting point.)

Adding a Table

You can add a table into a book’s page. Creating a table is preferable to adding an image of a table, which would not be accessible.

Click in the Text field in the position where you want the table to appear. Go to Table/Table in the text editor’s menu and ‘draw’ the number of rows and columns you want the table to have.

When you are adding text to the table’s cells an additional functions menu appears: Table properties, Delete table, Insert row before, Insert row after, Delete row, Insert column before, Insert column after and Delete column. These functions (and others) are also available if you go to Table in the text editor’s menu.

For accessibility we recommend that you either add a caption above the table or briefly describe the contents of the table in the paragraph before it (e.g. ‘The following table shows ,,,’).

Adding an Image 

You may need to add images into book pages.

To add an image, click in the Content field in the position where you want the image to appear. Go to Insert/Image in the text editor’s menu or click on the Image icon.

This will open a new pop-up window with the heading Image. Click on the Browse repositories button. 

Click on the Upload a file link, click on the Choose File button and navigate to the image you want to add. Ideally, the image should be no wider than 600 pixels.

Add the name of whoever created or owns the image in the Author box and select the appropriate licence in Choose licence. If the image is yours, is a logo or belongs to a company or organisation, choose All rights reserved. If it’s an image from a photo stock website, select whichever Creative Commons licence is attached to the image.

Click on Upload this file to open the Image details window.

If it’s a figure, describe the image in the How would you describe this image to someone who can’t see it? box. There’s a limit of 750 characters.

If it’s a decorative image, tick the box next to This image is decorative only.

Click on Save.

The image will appear in the text and media area along with any text already there.

If the image you’re adding is a figure you should also add a figure number and a caption underneath it.

Click on Save and return to course.

If you want to update the image, click on the icon of three vertical dots next to the text and media area and click on Edit settings from the drop-down menu. If you click on the image in the Textfield and then click on the Image icon, the Image details window will appear.

You may find that 750 characters is not enough to fully describe an image that you have added and to make the image truly accessible for any of your learners that rely on a screen reader. If you need to add more text to whatever you wrote in the How would you describe this image to someone who can’t see it? box, you will need to go into HTML view to edit your text. While you are editing your book click go to Tools/Source code Pro in the text editor’s menu or click on the Source code Pro icon.

4. Book: Embedding a Video, Adding Audio and Transcripts

You might also want to add video and/or audio footage to your book. Let’s take a closer look at how to add these different types of assets, and some different approaches to adding transcripts to your course. 

Embedding a Video

For storage reasons, videos should be embedded from a host site such as YouTube or Vimeo rather than directly uploaded to your course’s homepage. 

If you are creating original video content for your RCH course – rather than embedding existing content – you should discuss hosting on the RCH YouTube channel with your RCH points of contact. They will support with any branding requirements and arrange for your video content to be uploaded to the RCH YouTube channel. 

Embedding a video from YouTube requires a slightly different process.

Embedding a Video from Anywhere Other than YouTube

Place the cursor at the point in the course content where you want to add a video and click on the Embed media icon.

This will open a new pop-up window with the heading Content properties.

Copy and paste the URL of a video into the Enter URL: field.

Assuming the URL is valid, the form should automatically populate the title of the video and the video's dimensions in the Describe this content (optional): and Size fields.

  • Amend the description as preferred.
  • By default the video's dimensions will appear as 200 pixels wide, which is quite small. If you keep the Auto size tickbox ticked and change '200' to '600', the height will adjust automatically.

Click on Save content.

If you want to replace a video you can do so by double-clicking on it while you are editing your book.

Embedding a Video from YouTube

Find the video that you want to embed on YouTube and click on the Share button underneath it. 

This opens a pop-up window showing a variety of sharing options. Click on Embed. 

Make sure that the Enable privacy-enhanced mode tickbox is ticked. In the embed code 'www.youtube.com' should now read 'www.youtube-nocookie.com'. Click on Copy to copy the embed code. 

Go to the page in your Moodle book where you want to add the video and click on the Source code Pro button.

Place the cursor at the point in the course content where you want to add a video and paste the embed code.

Click on Save to return to the editing view and click on Save changes. 

Adding an Audio File

To add an audio file, place the cursor at the point in the course content where you want to add a video and click on the Multimedia icon. This will open a new pop-up window with the heading Insert media.

Add the audio file by dragging and dropping it into the area shown or by clicking on the Choose File button and navigating to it.

Edit the title of the audio in the Media title field and tick the relevant tickboxes to choose whether you want the audio to play automatically, be muted or play in a loop. (We recommend that you don’t untick Show controls.) Click on Save.

Note that audio podcast episodes can be added using the same method as embedding a video described above by entering the URL of the RSS feed into the Enter URL: field.

Adding a Transcript

It is good accessibility practice to provide a transcript of video and audio material in your course. Many learners find transcripts helpful, even if the audio or video file is fully accessible to them.

There are two ways of adding a transcript.

Method 1

Click on the Source code Pro icon and scroll down to where you embedded the video. Hit the Enter key on your keyboard to create a blank line in the code.

Copy the following code and paste it onto the blank line:

<details>
<summary><strong>Transcript</strong></summary>
<br>
<p>This is the first paragraph of the transcript.</p>
<p>This is the second paragraph of the transcript.</p>
<p>This is the third paragraph of the transcript.</p>
<hr>
</details>

Here's how the code above works onscreen: 

Transcript

This is the first paragraph of the transcript.

This is the second paragraph of the transcript.

This is the third paragraph of the transcript.


 

Then you’ll need to add the transcript itself.

As you can see, we’ve added three paragraphs with placeholder text at the end of the code. This is where your transcript will go. 

  • If you have a transcript and it’s already arranged into paragraphs you just need to add ‘<p>’ and ‘</p>’ to the beginning and end of each paragraph and paste them over the placeholder text. 
  • If you’re relying on an automatically generated transcript (from YouTube, for example), note that you will probably need to carefully edit it to make sure that the text is accurate and makes sense. It needs to be easy to read: several lines from an automatically generated transcript should be combined into one paragraph and you will need to make sure that the timing codes are removed.

Once you’re happy that your video and transcript are in place, click on the Save button and confirm that they’ve been added to the course correctly.

Method 2

Place the cursor at the point in the course content where you want to add it (e.g. under a video or audio file) and click on the HTML Transcript icon.

Give your transcript a Title, which you have the option of showing or hiding.

Add the transcript text in the Content field.

Click on Save.

5. Book: Adding a Click-to-Reveal Activity or Interactive Asset

Your course is looking great so far! Let’s now take a look at how to add a click-to-reveal activity or interactive asset. 

Adding a Click-to-Reveal Activity 

You can combine and adapt the code for adding a transcript (Method 1) and a box around text to create an activity that has a click-to-reveal answer.

Click on the Source code Pro icon and scroll down to the point where you want to add an activity. Hit the Enter key on your keyboard to create a blank line in the code.

Copy the following code and paste it onto the blank line:

<div style="width: 600px; border: 1px solid black; border-radius: 5px; padding: 10px; margin: 10px;">
<h5>Activity</h5>
<p>In which UK city is The Open University headquartered?</p>
<details>
<summary><strong>Reveal answer</strong></summary>
<br>
<p>The answer is Milton Keynes.</p>
<hr>
</details>
</div>

Here's how the code above works onscreen: 

Activity

In which UK city is The Open University headquartered?

Reveal answer

The answer is Milton Keynes.


Change the text in the code to suit the text of your own activity.

Adding an Interactive Asset

‘H5P’ is an abbreviation for ‘HTML5 package’ – interactive content such as presentations, videos and other multimedia, questions, quizzes, games and more. This feature allows HTML5 assets to be added to a course.

Any question attempts in the H5P are marked automatically and the grade is recorded in the gradebook.

This feature allows you to upload an existing H5P file that you have created on the H5P website. To add an H5P activity to a page in your Moodle book, place the cursor at the point in the course content where you want to add it and click on the Insert H5P content icon.

This will open a new pop-up window with the heading Insert H5P content.

If your H5P activity has a URL, copy and paste it into the H5P URL or file upload field.

If your H5P activity is a file, click on the Browse repositories button.

In the new pop-up window with the heading File picker, click on the Choose File button and navigate to the file you want to add. Add the name of whoever created or owns the file in the Author box and select the appropriate licence in Choose licence. Then click on the Upload this file button.

Returning to the Insert H5P content pop-up window, there are two drop-down lists with further options. Under H5P options you can choose whether you want to allow the H5P activity to be downloaded, or to include embed or copyright buttons; under Display options you can choose whether you want to allow the H5P activity to play automatically in the mobile app. Click on Insert H5P content.

 

6. Book: Importing Text from a Microsoft Word Document

Before we move onto to other types of resources, let's look at how to import content from Microsoft Word to your Moodle Book.

Importing Text from a Microsoft Word Document

Importing from Microsoft Word is another way to add content to your Moodle book. Moodle book automatically tags up your Word doc into HTML: new chapters are created based on text styled as ‘Heading 1’ and sub-chapters can be created based on text styled as ‘Heading 2’.

This means that you need to ensure that the Word document you want to upload uses styles consistently; otherwise you might get content in the book on the wrong pages.

You should also make sure that the Word document does not have Track Changes enabled. If it does, the text in the file will not import correctly.

To import a Microsoft Word document while you are editing a book, go to the Administration block on the left-hand side of the screen and click on Book administration and then Import from Microsoft Word.

On the new screen you can check the tickbox Create subchapters based on subheadings if the Microsoft Word document has content with the ‘Heading 2’ style.

Add the Microsoft Word file by dragging and dropping it into the area shown or by clicking on the Choose a file… button and navigating to it.

Click on the Import button for the importing screen to appear. Click on the Continue button.

Your Word file will be added as a new chapter to the end of your book.

7. Adding Resources: File

The file resource enables you to provide a file as a course resource for your learners. Where possible, the file will be displayed in the course interface; otherwise your learners will be prompted to download it. The file may include supporting files, so for example an HTML page may have embedded images.

Note that your learners will need to have the appropriate software to open the file.

A file may be used to share presentations given in class, or course handouts, learning journals, templates of forms, further reading, etc. You could provide draft files of certain software programs for your learners to edit and submit for assessment.

To add a file, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the File icon to open the New File page.

Add the title of your file in the Name field. You can choose to add a summary of the new file in the Description box and display this on your course’s homepage by ticking the Display description on main page tickbox.

Click on the Select files box to open a new pop-up window with the heading File picker.

Click on the Choose File button to find the file you want to upload.

Check that the author and licence information are correct in the Author field and the Choose licence drop-down list. and the licence.

Click on Upload this file to return to the New File screen.

If you click on the Appearance arrow, there are further options in the Display drop-down for you to choose how the link is displayed.

  • Automatic: The best display option for the file type is selected by default.
  • Embed: The file will appear in a small scrolling area on your course’s homepage.
  • Force download: When they click on the file, your learners will be given a prompt to download it.
  • Open: The file opens directly in your learner’s browser in the same window, which means that unless they use the browser’s Back button they will be navigating away from your course. (An intermediate page may display in some cases). It is therefore a good idea to put some help text in the Description field suggesting that they hold down the Ctrl key while clicking on the file, which will open it in a new tab in their browser.
  • In pop-up (do not use): The file opens in a new browser window. In general, pop-up windows are considered user-hostile because they don’t always work well with accessibility software. 

If you want to share the file’s size and format, and confirm when it was uploaded to your course homepage, you can do so by ticking the Show size, Show type and Show upload/modified date tickboxes.

You can choose to display the file size, such as ‘3.1 MB’, beside links to the file. If there are multiple files in this resource, the total size of all files is displayed.

You can also show the type of the file, such as ‘Word document’, beside links to the file. If there are multiple files in this resource (i.e. if you have uploaded a whole folder of files), the start file type is displayed. If the file type is not known to the system, it will not display.

Will your learners need to visit this page in order to complete your course? Make sure that the Completion conditions are correct.

Click on Save and return to course.

8. Adding Resources: Heading

A heading enables text and optional icons to be inserted among the activity links on your course’s homepage.

To add a heading, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Heading icon to open the New Heading page.

Add the name of the heading in the Enter heading name field.

A heading is not essential for passing a course, so the Completion conditions should be set to None.

Click on Save and return to course.

If you want to update the heading, click on the icon of three vertical dots next to the text and media area and click on Edit settings from the drop-down menu.  

9. Adding Resources: Page

Adding a page enables you to create a web page resource using the text editor. It can display text, images, video, audio, web links and embedded code, such as Google Maps. Advantages of adding a page rather than a file include it being more accessible (for example for learners using mobile devices) and that it’s easier to edit or update a page than re-uploading a revised file.

For large amounts of content, we recommend that you use a book rather than a page.

To add a page, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Page icon to open the New Page page.

Add the title of your new page in the Name field, and add the text for the page in the Page content field.

You can choose to add a summary of the new page in the Description box and display this on your course’s homepage by ticking the Display description on main page tickbox.

Will your learners need to visit this page in order to complete your course? Make sure that the Completion conditions are correct.

Click on Save and return to course.

If you want to update the text, click on the icon of three vertical dots next to the page and click on Edit settings from the drop-down menu.

Adding Links between Pages

Unlike the navigation between pages in a Moodle book, a page does not have automatic navigational links to the next or previous page on your course homepage. If this is what you need, you will need to manually add links between pages if this is what you need.

You can do this either by setting up a text or button link to the next or previous page.

Say you have two pages; let’s call them Page 1 and Page 2. If you want a link from Page 1 to Page 2, you would click on the title of Page 2 and copy Page 2’s URL from the browser.

Click on the icon of three vertical dots next to Page 1 and click on Edit settings from the drop-down menu.

Scroll down to the Page content box and decide where you want your link to the next page to appear. The simplest navigational choice for your learners would be to have it on a new line at the bottom of the page.

The usual convention for a link to the next page is to write ‘Next: [page title]’. So a link at the bottom of Page 1 to get to Page 2 would be ‘Next: Page 2’.

Highlight the text you have typed in for the next page link. Go to Insert/Link in the text editor’s menu or click on the Link icon.

This will open a new pop-up window with the heading Create link.

The text you highlighted will appear in the Text to display field.

Paste the URL that you copied from Page 2 into the Enter a URL field and click on Create link. The Page content box will now show that the link to the next page is a hyperlink.

Click on Save and return to course.

Now if you go to Page 1 you’ll see the link to the next page. You can use the same method for adding links to previous pages.

10. Adding Resources: Text and Media Area

The text and media resource enables text and multimedia to be inserted into the course page in between links to other resources and activities. These labels are versatile and can improve the appearance of a course if used thoughtfully. A text and media area can be used to:

  • Split up a long list of activities with a subheading or an image.
  • Display an embedded sound file or video directly on your course’s homepage.
  • Add a short description to a course section.

Note that a text and media area cannot be added to course completion tracking, so it should not be used for course content.

Text and Media Area: Adding Text 

To add a text and media area, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Text and media area icon to open the New Text and media area page.

Add some text in the Text field.

Usually text like this is not essential for passing a course, so the Completion conditions would be set to None.

Click on Save and return to course.

If you want to update the text, click on the icon of three vertical dots next to the text and media area and click on Edit settings from the drop-down menu.

Text and Media Area: Adding an Image

You can add images to the Text field.

Click in the Text field in the position where you want the image to appear. Go to Insert/Image in the text editor’s menu or click on the Image icon.

This will open a new pop-up window with the heading Image.

Click on the Browse repositories button.

Click on the Upload a file link, click on the Choose File button and navigate to the image you want to add. Ideally, the image should be no wider than 600 pixels.

Add the name of whoever created or owns the image in the Author box and select the appropriate licence in Choose licence. If the image is yours, is a logo or belongs to a company or organisation, choose All rights reserved. If it’s an image from a photo stock website, select whichever Creative Commons licence is attached to the image.

Click on Upload this file to open the Image details window.

If it’s a figure, describe the image in the How would you describe this image to someone who can’t see it? box. There’s a limit of 750 characters.

If it’s a decorative image, tick the box next to This image is decorative only.

Click on Save.

The image will appear in the text and media area along with any text already there.

Click on Save and return to course.

If you want to update the image, click on the icon of three vertical dots next to the text and media area and click on Edit settings from the drop-down menu. If you click on the image in the Text field and then click on the Image icon, the Image details window will appear.

Text and Media Area: Adding Multimedia 

You can embed a video or piece of audio in the Text field. Note that you embed the link to multimedia and do not upload the file; the file needs to be hosted on another platform, such as YouTube for videos.

Click in the Text field in the position where you want the multimedia to appear. Go to Insert/Multimedia in the text editor’s menu.

This will open a new pop-up window with the heading Insert media.

Depending on whether you want to add video or audio, go to the respective Video and Audiotabs.

Add the URL of the multimedia you want to share in the Video source URL/Audio source URL field.

You can add more details in the Display options, Advanced settings and Subtitles and captions drop-down menus, and briefly summarise its content in the Describe this content (optional): field. You can also adjust the size and alignment of the video.

Click on Insert media. The video will appear in the Text field.

Will your learners need to watch this video in order to complete your course? Make sure that the Completion conditions are correct.

Click on Save and return to course.

If you want to update the video, click on the icon of three vertical dots next to the text and media area and click on Edit settings from the drop-down menu. If you click on the video in the Text field and then click on the Embed media icon, the Content properties window will appear.

11. Adding Resources: URL

The URL module allows you to add a web link to anything that is freely available online as a course resource. You can copy and paste the URL of a particular web page, or you can use the file picker to choose a link from a repository such as Flickr, YouTube or Wikimedia (depending on which repositories are enabled for the site).

To add a URL, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the URL icon to open the New URL page.

Enter the name for the URL and a short description of it in the Name and Description fields, and then paste the URL in the External URL field. If you click on the Appearance arrow, there are further options in the Display drop-down for you to choose how the link is displayed. We recommend that you use Open as the preferred display option.

  • Automatic: When learners click on the link, an intermediate page appears. They can then click through to the actual link.
  • Embed: The linked site will appear in a small scrolling area on your course’s homepage. This means that your learner won’t be navigating away from your course and will also be able to see the content of the other website.
  • Open: The link opens directly in your learner’s browser in the same window, which means that unless they use the browser’s Back button they will be navigating away from your course. (An intermediate page may display in some cases). It is therefore a good idea to put some help text in the Description field suggesting that they hold down the Ctrl key while clicking on the link, which will open the link in a new tab in their browser.
  • In pop-up (do not use): The link opens in a new browser window. In general, pop-up windows are considered user-hostile because they don’t always work well with accessibility software. It is only appropriate to use a pop-up window if the page you are linking to is specially designed to be used as a pop-up tool and has no navigation of its own except a Close this window button. 

Will your learners need to visit this this URL in order to complete your course? Make sure that the Completion conditions are correct.

Click on Save and display to see your URL in its own page.

12. Adding Activities: Glossary

The glossary enables you and your learners to create and maintain a list of definitions, like a dictionary, or to collect and organise resources or information.

In a tutor-supported course, a tutor can allow learners to attach files to glossary entries. Attached images are displayed in the entry, which can be searched or browsed alphabetically, or by category, date or author. Entries can be approved by default or can require approval by a tutor before they are viewable by everyone. A tutor can allow comments on entries. Entries can also be rated by tutors or students (peer evaluation). Ratings can be aggregated to form a final grade which is recorded in the gradebook.

For RCH courses, collaborative elements will need to be limited for a glossary as our course's are not facilitated. This is to avoid spam, unsubstantiated comments or amendments.

If the glossary’s auto-linking filter is enabled on an entry, that entry will automatically be linked to the glossary definition wherever it appears in the course.

Glossaries have many uses, such as:

  • a bank of key terms (either static or collaborative)
  • a ‘handy tips’ resource of best practice in a practical subject
  • a sharing area of useful videos, images or sound files
  • a revision resource of facts to remember. 

Adding a Glossary 

To add a glossary, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

 This will give you a screen full of options. Click on the Glossary icon to open the New Glossary page.

Enter the name of the glossary and (if you require one) a short description of it in the Name and Description fields. If you want this description to appear on your course homepage just below the link to the glossary, you can tick the Display description on main page tickbox.

Any glossary you build will usually be for the course that it appears on, so you don’t need to tick the Is this glossary global? tickbox. Similarly, keeping the Glossary type setting as the default Secondary glossary will usually be what any course on OpenLearn Create requires.

There’s a variety of settings for creating a glossary, each with a help icon that includes more information.

  • Entries includes settings for whether glossary entries are approved by default, or linked automatically, and to permit editing, duplicate entries or comments.
  • Appearance includes settings for the display format (listed below), how many entries are shown on a page and whether links in the glossary are shown and a print view is available.
    • Simple, dictionary style: This format shows the entry and its definition, but not the name of whoever created or edited the entry; attachments are shown as links.
    • Full with author: This is a forum-like display format that shows the author’s name and the date that the entry was created or edited; attachments are shown as links.
    • Full without author: This also uses a forum-like display format that shows the date that the entry was created or edited, but not the author’s name; again, attachments shown as links.
    • Encyclopaedia: The same display format as ‘Full with author’, but attached images are shown inline rather than as a link.
    • Entry list: Only the entry is listed, as a link to the full definition.
    • FAQ: The words ‘Question:’ and ‘Answer:’ are appended to the entry and definition respectively.
    • Continuous without author: Entries are displayed one after another without any separation, other that the editing icons. 
  • You probably will not need to change the Ratings if your learners are not going to be rated on the entries they add or the Common module settings unless you are using groups. Likewise you can ignore Restrict access unless you need to add a restriction: something that your learners need to do before the glossary is available. This is not usual for a glossary activity. 

Click on the Save and return to course button. Your new glossary will now display on your course’s homepage.

Adding a Glossary Entry

 You will then need to add entries to your glossary.

To add a new entry to your glossary, switch editing on, go to your course’s homepage and click on your glossary’s title.

This will take you to the glossary, which currently has no entries. Click on the Add entry button to open the Add entry page. Type your term into the Concept field and its definition into the Definition field.

You can also add related terms in the Keyword(s) field, starting each one on a new line. If your glossary entried are automatically linked (see below) then the keywords will be automatically linked too.

Each glossary entry can have an associated list of keywords (or aliases). If the entry is auto-linked, then any keywords will also be auto-linked. Enter each keyword on a new line (not separated by commas).

There are three options in Auto-linking, all ticked by default:

  • This entry should be automatically linked: If site-wide glossary automatic linking has been enabled by an administrator and this tickbox is ticked, the entry will be automatically linked wherever it appears in the course. (Note that if this option is unticked, the following two options are not available.)
  • This entry is case sensitive: This setting specifies whether matching exact upper and lower case is necessary when there is automatic linking. You may wish to untick this for terms that are not always be capitalised, for example.
  • Match whole words only: This setting specifies whether only whole words will be linked. For example, if this option is checked, a glossary entry named ‘construct’ will not create a link inside the word ‘constructivism’. 

Click on the Save changes button. Your new glossary entry will now appear in the glossary. It will have an editing button next to it (a pen icon) if you need to make further amendments:

Arranging Glossary Entries into Categories

You might want to categorise your glossary entries.

To add a new category to your glossary, switch editing on, go to your course’s homepage and click on your glossary’s title.

This will take you to the glossary, which currently has no entries. Click on the Browse by alphabet drop-down list and click on Browse by category.

Click on the Edit categories button and then click on the Add category button to open the Add category page.

Type the name of the category in the Name field.

If site-wide glossary automatic linking has been enabled by an administrator and Automatically link this category is ticked, the category name will be automatically linked wherever it appears in the course. When a learner clicks on a category name link they will be taken to the ‘Browse by category’ page of the glossary.

Click on the Save changes button and then the Back button to return to the glossary.

To categorise individual glossary entries, if you edit the entry, just below the Definition field in the Categories drop-down list, which will now include the category you have just added.

Click on the relevant category for that glossary entry and click on the Save changes button.

Now if you browse by category, you will find the glossary entry that you have just categorised listed under that category.

13. Adding Activities: Quiz

You can add a quiz comprising various question types. A well thought-out quiz is ideal for assessment in an open online course – such as those developed by RCH - that do not have ongoing tutor or teacher support. Certain question types are better suited to a tutor-supported course.

You can allow the quiz to be attempted multiple times, with a time limit, where the questions shuffled or randomly selected from the question bank.

Each attempt is marked automatically (except for essay questions, which can only be marked manually and are therefore unsuitable for RCH courses) and the grade is recorded in the gradebook.

You can also choose when and if hints, feedback and correct answers are shown to learners.

Quizzes may be used:

  • as course exams.
  • as mini-tests for reading assignments or at the end of a topic.
  • as exam practice, using questions from past exams.
  • to deliver immediate feedback about performance.
  • for self-assessment. 

The Moodle website has more information about configuring Moodle quizzes.

Note that after a quiz has been attempted, it is only possible to make minor textual (but not functional) amendments, and they cannot be added or deleted. Therefore it is far better to make sure the quiz questions are all correct and functioning properly before making the course and quiz available to learners.

A quiz’s completion criteria can be set so that the learner must complete all the questions (regardless of whether a pass grade has been achieved) or that they have to achieve a passing grade. If the completion of a quiz leads to a digital badge or a certificate, you can use formative and summative quizzes in different ways – for example:

  • a series of three quizzes that the learner needs to complete without a passing grade, followed by an end-of-course quiz that does require a pass grade.
  • the learner needs to pass all four formative and summative quizzes.
  • if you don’t want a learner’s learning journey to be included in the badge criteria, only the end-of-course quiz needs a pass grade. 

You could also have a badge for each section of a course. 

For RCH courses we require at least an end of course quiz, comprising of around 10 questions with a pass rate of 80%. We aim to issue one digital badge/statement of participation per course.

When you set up a quiz’s grading, you are advised to read the guidance in Unit 4 on setting up activity and course completion tracking. You will also need to discuss digital badging and statements of participation with your RCH point of contact. 

Setting up a New Quiz

To add a quiz to your course, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Quiz icon to open the New Quiz page.

Enter the name for the quiz activity and (if you require one) a short description of it in the Name and Description fields. This is where you can explain the purpose of the quiz and how it works, whether the quiz has a pass grade (and if so, what the pass grade is, for example 50%) and whether the learner can attempt the whole quiz more than once (and therefore, if there is any enforced time delay between attempts).If you want this description to appear on your course homepage just below the link to the poll, you can tick the Display description on main page tickbox.

There’s a variety of settings for creating a quiz, each with a help icon that includes more information.

  • Timing includes options for whether you want to limit the time that the quiz is available.
  • Grade includes grading criteria, if this is relevant for your quiz. If your quiz has a pass grade, you can set it later when all the quiz questions have been set up. If there is no grade to pass, you can set it as 0.00 in Grade to pass.
  • Layout defines whether questions start on a new page and whether learners have to answer questions in order.
  • Question behaviour defines how learners interact with questions during the quiz. For information, all courses on OpenLearn use the Interactive with multiple tries setting.
  • Review options defines how and when a learner can review their quiz. In a quiz with the Interactive with multiple tries setting, the following options are selected:
    • During the attempt: Whether correct, Marks, Specific feedback, General feedback.
    • Immediately after the attempt: The attempt, Whether correct, Marks, Specific feedback, General feedback, Overall feedback.
    • Later, while the quiz is still open: The attempt, Whether correct, Marks, Specific feedback, General feedback, Overall feedback. 
  • Appearance includes further settings for the quiz.
  • Safe Exam Browser is a customised web browser. Your course won’t need this.
  • Extra restrictions on attempts is where you can set a time delay between quiz attempts to encourage learners to review the course content material before they attempt the quiz again.
  • Overall feedback can be used to provide different feedback at various grade boundaries. For example, you could write a congratulatory message for learners with a score above the pass grade boundary and a message encouraging them to revisit the course material and try again if they scored below the pass grade boundary.
  • Common module settings includes availability and language options, and is also relevant if your course uses groups.
  • Restrict access includes the option to add restrictions, if for example you only want your quiz to be available after a certain date, or after a learner has completed another action. 

Click on the Save and display button. Now you've set up a quiz you can add some questions to it. You can read more about creating quiz questions in Unit 1’s Assessment and Quiz Questions. 

Note that you can edit the quiz’s settings at any time before making it available to learners; editing the settings after that may cause problems for any learners who have already completed it.

Creating Quiz Questions 

Having clicked on Save and display you should now see the front page of your quiz a screen with the title you gave it:

[Name of quiz]

Grading method: Highest grade

Grade to pass: 8.00 out of 10.00 (80%)

There'll also be an Add question button and a note that no questions have been added yet.

Go to the Administration block on the left-hand side of the screen and click on Question bank, and then Questions.

On the new screen, Question bank, click on the Create a new question ... button. This opens a pop-up box, Choose a question type to add.

Creating a quiz that uses more than one question type will provide more variety and a bigger challenge for your learners.

  • For each question type, don't change the Category at the start of the form but make a note of what it says – you'll need this later.
  • The Question name isn't the question itself – it's a reference to which question it is. If you were to have more than one quiz on your course, it would be bad practice to type 'Question 1' here, because you wouldn't know which quiz it was Question 1 for. So for example, assuming you've given your quiz the title 'Final quiz', if you were creating the first question for it you would type 'Final quiz question 1' here.
  • You don't need to include a question number in the Question text field – that will appear automatically.
  • After you save the question you will go back to the Question bank. You'll be able to see the question you have just created in a table – the name you gave it under Question name will appear in the third column.   

More details on the types of questions available can be found on Moodle’s website and the following guidance shows you how to add recommended question types that are popular on OpenLearn Create courses. Creating a quiz that uses more than one question type provides more variety and a bigger challenge for your learners.

Quiz question types 

The most popular question types used on OpenLearn Create are as follows (please note that these links will open in a new window and take you to the original CREATE Toolkit instructions for setting up each): 

14. Adding Activities: Setting up your Quiz

Now that you’ve added quiz questions to your course, let’s take a closer look at how to add questions to a quiz, set the pass grade, randomise the question order and test your quiz.  

Adding Questions to your Quiz and Setting the Pass Grade 

After you have created all the questions for your quiz go to the Administration block on the left-hand side of the screen and click on Questions.

  • On the new page, titled Questions, click on Add and select + from question bank.
  • On the pop-up menu that appears, called Add from the question bank at the end, you'll see the questions you have created in a table at the bottom. Just above them is a small square that reads Select questions for bulk actions if you hover over it. Tick this and then click on the Add selected questions to the quiz button at the bottom.
  • Your questions will now appear on the Questions page.
  • By default each question of the quiz will appear on a new page. You can combine questions onto a page by clicking on the X that appears to the left of the questions. (If you change your mind, you can click on the + that replaces the X.) You can also change the order of the questions by either clicking on or dragging the four-arrowed Move icon. 

 As you create or edit questions you can decide how much each one is worth under Default mark.

Having added questions to your quiz, the number listed against Total of marks: is the total number of marks that all the questions in the quiz add up to. To make it easier for learners to understand how well they did, their marks can be converted into a percentage score if the number in the Maximum grade field is set to 10.00 or 100.00.

When a learner completes a quiz they are given both a mark and a grade. For example, in a quiz where the total number of marks adds up to 6.00, if the maximum grade is set as 10.00 then the learner is given a percentage that is easier to understand: 

Marks 4.50/6.00

Grade 7.50 out of 10.00 (75%) 

To set a pass boundary on a quiz that has a maximum grade of 10.00, go to Grade in the quiz settings and change the figure in the Grade to pass field to 5.00 for a 50% pass boundary, or to 7.50 for a 75% pass boundary, etc.

Setting up Categories for Random Variant Questions

Setting up a quiz this way means that learners will see the same questions in the same order every time they attempt the quiz. 

If you want learners to see different questions each time they attempt the quiz, you will first need to set up new categories in the question bank and writing at least one alternative version (or ‘variant’) of a question.

You can set up categories before you start creating questions. The example below assumes that: 

  • you’ve created questions and a quiz by following the guidance above.
  • you will use the same question type for each variant. 

Go to the Administration block on the left-hand side of the screen and click on Question bank, and then Categories.

On the new screen, Edit categories, you’ll see a list with the heading ‘Question categories for “Quiz: [the name of your quiz]’, which will have a number in brackets corresponding to the number of questions you’ve written for it.

Click on the Add category button. This opens a pop-up box, also named Add category. 

  • Select the Parent category from the drop-down list. You should select the option Default for [the name of your quiz], again with a number in brackets.
  • For this example let’s assume you want to create variants for Question 1. Enter ‘Question 1 variants’ into the Name field.
  • You don’t need to add Category info or an ID number.
  • Click on Add category. 

Your new category will now be listed on the Edit categories screen.

Go to the Administration block on the left-hand side of the screen and click on Question bank, and then Questions. 

  • Each question appears in a row. Find Question 1 and select the tickbox at the start of the row.
  • Click on the With selected button and select Move to…. 
  • A pop-up box will appear named Move the selected questions to…. Under the Question categories heading, select the ‘Question 1 variants’ category that you’ve just created from the drop-down list.
  • Click on Move questions and then Confirm. 

Question 1 will now appear in the new category.

To create a variant, go to the question and click on Edit. Select ‘Duplicate’ from the drop-down list. 

  • Note that each question (and therefore each variant) needs a unique Question name. By default the duplicate will have the same Question name as whatever you gave Question 1, but with ‘(copy)’ added.
  • You may want all variants for Question 1 to have the same Question name but with ‘Variant 1’, ‘Variant 2’, etc. added at the end – whatever works best for you.
  • You can then edit the question as preferred, amending the question text, answers and feedback.
  • Click on Save changes. 

Repeat this process for as many variants as you need for Question 1 – three is usually enough for variety.

After you have created all the Question 1 variants for your quiz go to the Administration block on the left-hand side of the screen and click on Questions. 

  • On the new page, titled Questions, click on Add and select + a random question. (If you’ve already set up a quiz using the guidance above but want to start again, you may want to delete the questions you added previously by clicking on the trash/Delete icon.)
  • On the pop-up menu that appears, called Add a random question at the end, you'll see the questions you have created in a table at the bottom. Above the questions is a drop-down list labelled Type or select…. Click on this and select the ‘Question 1 variants’ category, and then click on the Apply filters button.
  • The variants you created for Question 1 will now appear in the list. By default the Number of random questions drop-down list will be set at 1 – don’t change this.
  • Click on Add random question.
  • Your random question will now appear on the Questions page. 

You can repeat this process to create variants for all the questions in your quiz.

Alternatively, you may prefer to set up a quiz where you have written (for example) ten questions but the learner only answers five by changing the number in the Number of random questions drop-down list.

Moving Existing Questions into a Question Category

If you are amending an existing quiz to add questions or move questions around, you can move existing questions in a Quiz into the appropriate categories in the question bank once you’ve set up the categories, then amend those questions if necessary.

To move an existing question into one of the question categories, open the question in edit mode. You will see the Use this category box is checked if a question is already in a default category.

Uncheck the Use this category box and select the appropriate category for that question from the drop-down list which is now available to you.  Save the changes to the quiz question.

Amending Existing Quizzes 

If you need to amend an existing quiz once a course has gone live, please discuss possible next steps with your RCH point of contact.

Testing your Quiz 

Whilst you can set-up and edit your quiz, you won’t be able to see how the learner will see the quiz because the editor preview mode for each question does not use the same visual layout as the learner would see. It also does not replicate what the question looks like on a mobile device.

You may remember from the Working as a team to produce your course section that you can add Collaborators to your course. These might be colleagues who are involved in helping you set-up the course, or testing. The Reviewer role can also be assigned to support testing quizzes. To test your quiz, you can:

  • Choose wrong answers to questions to check whether too many hints have been provided in relation to the number of answer choices available. You can reduce the number of hints to reduce the number of tries, and adjust the penalty percentage as appropriate.
  • Choose wrong answers to questions to test how the questions behave and what, where and when feedback and navigational messages appear for learners.
  • Use the browser developer tools to display the quiz in mobile mode to confirm that the questions display correctly. For example, long boxes in drag and drop questions will fall beyond the display space and force a scrollbar to appear, which is not a good user experience for learners. This might mean that the question needs to be redesigned to work better on a small screen. 

If a quiz has a pass grade applied, you will also need to do the following checks: 

  • Attempt the quiz to check that the marks and grade awarded have been calculated correctly. For example, if the quiz has a total of 10 marks with a pass grade of 50%, you might score 5 but are not shown that you have achieved a pass. Check that the maximum grade and pass grade have been entered correctly, and update these settings if necessary; your colleague/test account can then refresh their view of the quiz review screen to check that the grades and percentages are now correct.
  • When you have configured the overall feedback messages at grade boundaries, use your test account to see which message you get when you get a score close to the pass grade boundary. Moodle’s guidance for overall feedback at grade boundaries tends to use rounded percentages (e.g. 50%) for a pass/fail boundary; in practice you may prefer to set it to 49.9% for the fail message rather than 50%. 

You can delete all these test attempts of the quiz, especially if adjustments need to be made to questions during testing or if you have enabled a time delay on repeat attempts of the quiz.

15. Adding Activities: SCORM Package

A Shareable Content Object Reference Model (SCORM) package is a collection of files that is packaged according to an agreed standard for learning objects.

A SCORM package could be used for presenting multimedia content and animations, or as an assessment tool.

This feature means that SCORM or AICC packages to be uploaded as a .ZIP file and added to your course. Content is usually displayed over several pages, with navigation between the pages. There are various options for displaying content in a pop-up window, with a table of contents, with navigation buttons etc. SCORM activities generally include questions, with grades being recorded in the gradebook.

You will need to ensure that you configure the settings in the SCORM package to enable sharing of completion data with Moodle, then configure the uploaded SCORM file settings to pick up on the completion data. 

There are advantages and disadvantages to using a SCORM package on OpenLearn Create. The Moodle platform that OpenLearn Create is built on doesn't generate SCORM content; it presents the content in SCORM packages to learners and saves the data about learner interactions with the SCORM package rather than in Moodle. This may have affect your course’s completion tracking.

If you have created a course in Articulate 360 and want to import it as a SCORM package into your OpenLearn Create course, you need to ensure that the export settings are configured as follows: 

  • Export type: LMS
  • LMS: SCORM 1.2
  • Tracking: Track using course completion
  • Reporting: Complete/Incomplete (not Passed/Incomplete)
  • Exit course link: Off or On (dependent on the project). 

To upload a SCORM package, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the SCORM package icon to open the New SCORM package page.

Enter the name for the SCORM package and (if you require one) a short description of it in the Name and Description fields. If you want this description to appear on your course homepage just below the link to the SCORM package, you can tick the Display description on main pagetickbox.

Add the SCORM package in the Package file box.

Choose the following settings from the drop-down lists under Appearance (you should click on Show more… to reveal them all): 

  • Display package: Current window
  • Student skip content structure page: Always
  • Disable preview mode: Yes
  • Display course structure in player: Disabled
  • Display course structure on entry page: No
  • Display attempt status: No 

Choose the following settings from the drop-down lists under Compatibility settings:

  • Force completed: No
  • Auto-continue: No
  • Auto-commit: Yes
  • Mastery score overrides status: Yes 

Click on the Save and display button.

16. Moving your Content Around (and Moving around your Content)

You can reorder the activities or resources on your course homepage and add links to navigate between them.

Reordering Activities or Resources

You may decide that you need to reorganise the order of some of your activities or resources.

In the editing view of your course’s homepage your activities and resources have an icon of three vertical dots next to them.

Click on this icon to reveal a drop-down menu with the choices Edit settings, Move, Availability, Duplicate, Assign roles and Delete.

Click on Move. Your course homepage now features a series of boxes with dotted lines that show you which places you can move your activity or resource to.

Click on the position you would like to move your activity or resource to. It will then be displayed in your chosen location.

Navigating between Different Activities and Resources

If you have set up a Moodle Book with multiple chapters you will have seen that it automatically generates arrows to get to next and previous pages within it.

How will your learners navigate from a book to a quiz, and then to a forum, and back to another book?

In the Topics layout, each section you have created will be listed on your course’s homepage for as a list under the Course content tab. In the course content itself, the section headings appear on the left-hand side of the screen.

If you click on one of the section headings, a drop-down box appear that makes it easy to navigate to one of the activities or resources in that section.

If you have lots of activities or resources in each section, you will need to set up your own links once you're happy with the order that your content is in.

Setting up the links between pages is described in the ‘Adding resources’ section of this course, under the heading ‘Adding links between pages’. Using the method described here you should be able to create links between different resources and activities. The creators of the course Observing the night sky: what next? created their own image files for the 'Back' and 'Next' page button links, but text links work equally well.

17. Next Steps

Now that you’ve added resources and activities to your course, you’re almost ready to publish! In the next unit of the course, we’ll take a closer look at what you need to do to prepare your RCH course for publication in Unit 4 Check, Test and Publish!

18. Further Reading