Building your Course

13. Adding Activities: Quiz

You can add a quiz comprising various question types. A well thought-out quiz is ideal for assessment in an open online course – such as those developed by RCH - that do not have ongoing tutor or teacher support. Certain question types are better suited to a tutor-supported course.

You can allow the quiz to be attempted multiple times, with a time limit, where the questions shuffled or randomly selected from the question bank.

Each attempt is marked automatically (except for essay questions, which can only be marked manually and are therefore unsuitable for RCH courses) and the grade is recorded in the gradebook.

You can also choose when and if hints, feedback and correct answers are shown to learners.

Quizzes may be used:

  • as course exams.
  • as mini-tests for reading assignments or at the end of a topic.
  • as exam practice, using questions from past exams.
  • to deliver immediate feedback about performance.
  • for self-assessment. 

The Moodle website has more information about configuring Moodle quizzes.

Note that after a quiz has been attempted, it is only possible to make minor textual (but not functional) amendments, and they cannot be added or deleted. Therefore it is far better to make sure the quiz questions are all correct and functioning properly before making the course and quiz available to learners.

A quiz’s completion criteria can be set so that the learner must complete all the questions (regardless of whether a pass grade has been achieved) or that they have to achieve a passing grade. If the completion of a quiz leads to a digital badge or a certificate, you can use formative and summative quizzes in different ways – for example:

  • a series of three quizzes that the learner needs to complete without a passing grade, followed by an end-of-course quiz that does require a pass grade.
  • the learner needs to pass all four formative and summative quizzes.
  • if you don’t want a learner’s learning journey to be included in the badge criteria, only the end-of-course quiz needs a pass grade. 

You could also have a badge for each section of a course. 

For RCH courses we require at least an end of course quiz, comprising of around 10 questions with a pass rate of 80%. We aim to issue one digital badge/statement of participation per course.

When you set up a quiz’s grading, you are advised to read the guidance in Unit 4 on setting up activity and course completion tracking. You will also need to discuss digital badging and statements of participation with your RCH point of contact. 

Setting up a New Quiz

To add a quiz to your course, switch editing on, go to your course’s homepage and click on the + Add an activity or resource button.

This will give you a screen full of options. Click on the Quiz icon to open the New Quiz page.

Enter the name for the quiz activity and (if you require one) a short description of it in the Name and Description fields. This is where you can explain the purpose of the quiz and how it works, whether the quiz has a pass grade (and if so, what the pass grade is, for example 50%) and whether the learner can attempt the whole quiz more than once (and therefore, if there is any enforced time delay between attempts).If you want this description to appear on your course homepage just below the link to the poll, you can tick the Display description on main page tickbox.

There’s a variety of settings for creating a quiz, each with a help icon that includes more information.

  • Timing includes options for whether you want to limit the time that the quiz is available.
  • Grade includes grading criteria, if this is relevant for your quiz. If your quiz has a pass grade, you can set it later when all the quiz questions have been set up. If there is no grade to pass, you can set it as 0.00 in Grade to pass.
  • Layout defines whether questions start on a new page and whether learners have to answer questions in order.
  • Question behaviour defines how learners interact with questions during the quiz. For information, all courses on OpenLearn use the Interactive with multiple tries setting.
  • Review options defines how and when a learner can review their quiz. In a quiz with the Interactive with multiple tries setting, the following options are selected:
    • During the attempt: Whether correct, Marks, Specific feedback, General feedback.
    • Immediately after the attempt: The attempt, Whether correct, Marks, Specific feedback, General feedback, Overall feedback.
    • Later, while the quiz is still open: The attempt, Whether correct, Marks, Specific feedback, General feedback, Overall feedback. 
  • Appearance includes further settings for the quiz.
  • Safe Exam Browser is a customised web browser. Your course won’t need this.
  • Extra restrictions on attempts is where you can set a time delay between quiz attempts to encourage learners to review the course content material before they attempt the quiz again.
  • Overall feedback can be used to provide different feedback at various grade boundaries. For example, you could write a congratulatory message for learners with a score above the pass grade boundary and a message encouraging them to revisit the course material and try again if they scored below the pass grade boundary.
  • Common module settings includes availability and language options, and is also relevant if your course uses groups.
  • Restrict access includes the option to add restrictions, if for example you only want your quiz to be available after a certain date, or after a learner has completed another action. 

Click on the Save and display button. Now you've set up a quiz you can add some questions to it. You can read more about creating quiz questions in Unit 1’s Assessment and Quiz Questions. 

Note that you can edit the quiz’s settings at any time before making it available to learners; editing the settings after that may cause problems for any learners who have already completed it.

Creating Quiz Questions 

Having clicked on Save and display you should now see the front page of your quiz a screen with the title you gave it:

[Name of quiz]

Grading method: Highest grade

Grade to pass: 8.00 out of 10.00 (80%)

There'll also be an Add question button and a note that no questions have been added yet.

Go to the Administration block on the left-hand side of the screen and click on Question bank, and then Questions.

On the new screen, Question bank, click on the Create a new question ... button. This opens a pop-up box, Choose a question type to add.

Creating a quiz that uses more than one question type will provide more variety and a bigger challenge for your learners.

  • For each question type, don't change the Category at the start of the form but make a note of what it says – you'll need this later.
  • The Question name isn't the question itself – it's a reference to which question it is. If you were to have more than one quiz on your course, it would be bad practice to type 'Question 1' here, because you wouldn't know which quiz it was Question 1 for. So for example, assuming you've given your quiz the title 'Final quiz', if you were creating the first question for it you would type 'Final quiz question 1' here.
  • You don't need to include a question number in the Question text field – that will appear automatically.
  • After you save the question you will go back to the Question bank. You'll be able to see the question you have just created in a table – the name you gave it under Question name will appear in the third column.   

More details on the types of questions available can be found on Moodle’s website and the following guidance shows you how to add recommended question types that are popular on OpenLearn Create courses. Creating a quiz that uses more than one question type provides more variety and a bigger challenge for your learners.

Quiz question types 

The most popular question types used on OpenLearn Create are as follows (please note that these links will open in a new window and take you to the original CREATE Toolkit instructions for setting up each):