Competition Rules

14. Penalties, Score Reductions and Disqualification

The UK Lunabotics Competition is designed to reward safe, professional, and technically robust engineering. Teams are expected to comply with all competition rules, safety requirements, inspection procedures, and operational instructions throughout the event.

Where rule breaches occur, competition officials may apply:

  • Score reductions
  • Loss of eligibility to score in a category
  • Disqualification from a competition run
  • Disqualification from the competition

The severity of any action taken will depend on the nature of the violation and its impact on safety, fairness, and competition integrity.

Inspection Failures

All teams must complete the required inspections before they can compete.

These include:

  • Vehicle Inspection
  • Communications Check
  • Safety Verification

Teams that fail any required inspection will not be permitted to enter the competition arena until all identified issues have been resolved and approved by the judges.

Communications Check Failure

Teams are allocated a limited period to complete the Communications Check.

Failure to demonstrate compliance with communications requirements may result in:

  • Failure of the Communications Check
  • Removal from the competition schedule
  • Disqualification from the competition

Examples include:

  • Inability to establish wireless control of the robot
  • Non-compliant router configuration
  • Missing communications documentation
  • Use of prohibited communications equipment
Energy Monitoring Penalty

The robot's power monitoring system must be installed according to the competition requirements.

Where an energy monitoring system is incorrectly installed or wired, a penalty of –30 points will be applied to the Berm Construction Productivity – Energy score.

Teams should verify the installation of their power monitoring equipment during testing and before inspection.

Arena Boundary Violations

Robots are required to remain within the competition arena throughout the run.

Penalties may be applied if a robot:

  • Leaves the arena boundary
  • Contacts the arena walls excessively
  • Causes damage to the arena infrastructure
  • Operates outside designated competition areas

Specific point deductions may be announced in future rulebook updates.

Competition Run Termination

Competition officials may terminate a run before the allotted time has expired if:

  • The robot presents a safety risk.
  • The robot becomes inoperable.
  • The team is unable to continue the mission.
  • Competition rules are being violated.
  • Team members fail to follow instructions from officials.

Runs may also be terminated if the robot fails to demonstrate meaningful progress during the mission.

Examples include:

  • Extended loss of communications
  • Extended loss of mobility
  • Loss of excavation capability
  • Loss of deposition capability
  • Complete system failure
Teams are encouraged to notify judges if a mission-ending failure occurs rather than continuing a run that can no longer achieve its objectives.
 
Safety Violations

Safety is the highest priority throughout the competition. Competition officials may immediately stop a run if a robot or team member creates an unsafe situation.

Examples include:

  • Missing safety equipment
  • Unsafe battery practices
  • Unsafe lifting procedures
  • Operating a robot in a hazardous manner
  • Failure to follow safety instructions

Serious safety breaches may result in immediate disqualification from the run or from the competition.

Failure to Follow Official Instructions

Arena staff, judges, and competition officials are responsible for maintaining a safe and fair competition environment. Teams are expected to comply promptly with all instructions issued by authorised personnel. Failure to do so may result in:

  • Warning notices
  • Point deductions
  • Termination of a competition run
  • Disqualification from the competition
Unsporting or Unprofessional Behaviour

All participants are expected to behave professionally and respectfully. Examples of unacceptable behaviour include:

  • Harassment or intimidation
  • Offensive language or conduct
  • Disrespect towards officials
  • Deliberately misleading judges
  • Tampering with competition facilities
  • Interfering with another team's activities
  • Attempts to gain an unfair advantage

Competition organisers reserve the right to apply penalties where behaviour is considered inconsistent with the spirit of the competition.

Use of Prohibited Technologies

Robots found to contain prohibited technologies or systems may fail inspection or be disqualified.

Examples include:

  • GPS systems
  • Prohibited communications equipment
  • Restricted sensing technologies
  • Any system specifically banned within the rulebook

Teams are responsible for ensuring that all systems comply with the published technical requirements.

Competition Integrity

The competition relies on honesty, transparency, and good engineering practice. Actions that compromise competition integrity may result in serious penalties.

Examples include:

  • Falsifying inspection information
  • Deliberately concealing non-compliant systems
  • Misrepresenting robot capabilities
  • Circumventing competition procedures
  • Providing inaccurate technical information to judges

Competition officials reserve the right to investigate suspected rule violations and determine appropriate actions.

Disqualification

A team may be disqualified from a single run or from the entire competition if serious breaches of the rules occur. Examples of situations that may lead to disqualification include:

  • Failure to pass mandatory inspections
  • Serious safety violations
  • Use of prohibited equipment
  • Deliberate rule circumvention
  • Interference with other competitors
  • Refusal to comply with official instructions
  • Actions that compromise the fairness or integrity of the competition

The decision of the judges and competition organisers regarding safety, compliance, and competition integrity is final.

Good Practice

To avoid penalties, teams should:

  • Read the full rulebook carefully.
  • Conduct internal compliance reviews.
  • Test all systems thoroughly before arrival.
  • Maintain clear documentation.
  • Prioritise safety at all times.
  • Ask for clarification whenever requirements are unclear.
  • Behave professionally throughout the event.

Teams that combine good engineering, careful preparation, and professional conduct are most likely to achieve success in UK Lunabotics.