Skip to main content

About this free course

Download this course

Share this free course

Manufacturing
Manufacturing

Start this free course now. Just create an account and sign in. Enrol and complete the course for a free statement of participation or digital badge if available.

5 Joining

5.1 Introduction

In addition to manufacturing an individual component using a single casting, forming or cutting process, we could assemble it from a number of simpler shapes joined together. There are other reasons for employing joining in a manufacturing operation. A product can be too big to make in one piece. The need to transport the product from the place of manufacture to its destination may limit the processes that can be used – it is often simpler to transport the product in parts, and assemble these parts at the relevant location. The building of a house or super-tanker are obvious examples. Joining can also be useful if a product has a complex shape, or if there is a need to combine different materials together. All these factors make it advantageous to join together previously shaped components in order to fabricate a complete and useful product.

In general terms, there are three basic methods of joining material together:

  • Mechanical joints using fasteners where the elastic and/or frictional properties of a material are exploited to hold two components together physically (rivets, nuts and bolts, screws and so on).

  • Gluing, where a layer of another material is introduced between two surfaces and later solidifies to form a solid joint.

  • Welding, where the aim is to create a joint between two surfaces which is similar to the bulk material.

Although you can join things with simple glues or even Sellotape, here we will be concerned with methods of joining solid components in such a way that the joint will remain intact throughout its service life. The designer's aim is to select a joining process and a joint geometry such that the joint itself is not the weak link in the chain. Of course, joining techniques are also available that allow the joints to be taken apart at some time in their lives.